If you have an old pendant light in your home, it might be time for a new one. The following tips will help you safely remove the old light and get the new one installed effectively:

Take the Preparation Steps

Before you attempt to do electrical work at home, make sure you take the right preparation steps. First of all, you need to disconnect the electricity to the breaker box. You want to find the breakers going to the room where you will be working. This prevents someone else from accidentally turning on the light when you are attempting to replace it.

Once you have disconnected the power, use a circuit tester to be sure no electricity is flowing through the fixture. Also be sure you have a pair of electrical gloves when working with wires. These are made specifically for electrical repairs and have high-voltage protection.

Remove the Old Fixture

You can now start removing the old pendant light fixture. To remove the pendant light, you will first need to remove the screws attached to the mounting bracket. Most pendant lights need a Phillips-head screwdriver. You might want to have someone hold the lighting fixture in place while you loosen the screws. This prevents it from falling to the floor.

After you remove the screws, pull the fixture away just far enough to expose the wires. Remove the wire nuts first, then start disconnecting the wires. Keep an eye on how the wires are connected so you can reconnect the new fixture in the right place.

Install the New Fixture

Take a look at the new lighting fixture and see how it should be mounted. If it is mounted with a mounting bracket, you can keep the old fixture's bracket attached to the ceiling. That way, all that has to be done is reconnecting the wires for the new fixture and tightening the screws to attach it to the mounting bracket.

However, there may be a bolting system used instead of the traditional mounting bracket. If this is the case, you first need to remove the mounting bracket from the ceiling. You will then attach to the new mounting hardware and bolts.

Once you have done that, you can pull the wires through the bracket and attach them to the new lighting fixture. Attach the lighting fixture to the mounting bracket, making sure the screws are secure. You can now turn the power on and test your lighting fixture.

For more help, or if you want to know more, contact a company like Dhillon Lighting Inc light stores with any questions you have.

Share